How to measure V Belt sizes and Dimensions

There are more than sixty six (66) various dimensions, sizes and types of belts that are used in the agriculture equipment industry. These various belts are used in tractors, combines, balers, snow blowers, tillers, mowers, harvesters and lawn and garden tractors.

V Belts are used as fan belts, timing belts, alternator belts, drive belts for mowers, and general pulley driven devices found in combines, mowers, balers, harvesters and other agricultural equipment.

To change a cut or damaged V belt, it must first be identified. The fastest and easiest way to identify a belt is to deduce the V belt part number that is written on it.

However, in practice, sometimes this is not possible, and then other methods must be used. The basic V belt has a trapezoidal cross section, with equal sides, and different lengths at the top and bottom. There are five popular (5) basic v belt types (called Classical V Belt), and these are defined as A, B, C, D and E. Models Z and F will not be covered here. Each V Belt can have its part number described by utilizing five key dimensions, namely, the top width pitch width, height, angle and true circumference.

The A model has a top width of 13mm (1/2 inch) and a height of 8 mm (5/16th of an inch).

The B model has a top width of 17mm (21/32nd of an inch) and a height of 11 mm (13/32nd of an inch).

The C model has a top width of 22 mm (7/8th of an inch) and a height of 14 mm (17/32nd of an inch).

The D model has a top width of 32 mm (1 1/4th of an inch) and a height of 19 mm (3/4 of an inch).

The E model has a top width of 38 mm (1 1/2th of an inch) and a height of 23 mm (29/32nd of an inch). All classical belts have angles of 40 degrees.

The other major variant of this component is its length. The normal outside and inside circumference of the belt can be measured. However, for measuring and part number identification purposes, this is not the true circumference. The effective circumference of the belt is the part of the belt that most of the pressure is concentrated on while under word pressures (called pitch length). This line is generally located at the neutral axis near the cord line and varies with cross section and construction. This circumference is typically a few millimeters under the top width of the belt.

Some manufacturers and users prefer the pitch length to identify belts. However, most users tend to use the inner circumference of the belt for identification purposes. For example, a belt with a “C” dimensions and an inner length of ninety five (95) inches will have part number of C95. This description can be used to identify the other types for the A, B, D, Z and E.

Basic knowledge and guide of Electric RC cars

Electric RC cars are the most popular today. This might be because of the fact that every RC car beginners will get started with this type of RC car, this is due to operation of an electric RC cars is easy to be understood. Electric RC car which powered by battery packs have a lot of advantages compared to nitro / gas RC cars. If you are new in the RC world , you might probably face difficulty to choose the right electric RC car which will satisfied you. The most important thing before you make a purchase, you need some information to guide you to avoid wrong choice.

First what are consideration to be made. This is important to every person who would like to be engage in Electric RC cars world.
1. What are Advantage
2. What type of RC cars
3. What size of RC cars.
4. What options to choose.
5. Convenience.

1.Advantage of electric RC cars.
– User friendly
– Easy and less maintaining
– Less tuning and set-up
– Less cost
– Noise less
– Smoke less
– Light weight

2. Type of electric RC cars
– On-road RC cars. Consist of Touring , racing and Drift cars.
– Off-road RC cars. Consist of Buggies and Monster truck.
– Indoor RC cars . Consist of mini / micro cars.

3. Size of electric RC cars.
– 1/ 10, 1/ 12, 1/ 16, 1/ 18, 1/ 24, 1/ 27, and 1/ 30.

4. Option to choose.
There are two options available in the market.
Option 1.
Electric RC car – RTR kits ( Ready to run )

This option is specially design for beginners.
RTR package are comes with ready build RC car included:
– RC car body / Chassis
– Electronic speed controller
– 17 turn motor
– Radio transmitter and servos
– 4 tires
– Painted body shell
You don’t have to worry about assembly RC car parts and painting the body shell. All that’s left for you to do is to add your battery and you are ready to lay down on the track. After experiencing good in handling and maintained of RTR RC cars, you are now ready go to a step further.

Option 2.
Electric RC car pro kit

This option are design for racer.
Feature of this kit is only RC car body ( chassis ) and you will need to assemble all of single parts of this body . Normally it’s will take about 4 to 5 hours to complete this task. To run this kit on track you have to add another parts or accessories such as:
– 4 Tires ( Completed with insert + rim )
– Motor ( Brushed / Brushless )
– ESC ( Electronic speed controller )
– Battery pack. ( 6 cells )
– Battery charger
– Body shell.
– Radio Transmitter and servos
All RC parts or accessory as listed above can be buy separately from various brand or maker around the world.

5.Convenience.
In this last consideration you have to know where:
– Play ground or track available at your area.
– Hobby shop nearby to find your spare parts
– Is this shop sell electric RC car parts which you will choose.
– Is there any technical support or advised provided by this shop.
– Is there have any others community run a same model or type which you choose.
This will help you to improve your driving skill faster then you run alone on the track.